Poclain VP-NDV Flow Control Valve - Throttle with Check Valve

VP-NDV throttle-check valve contains two throttling spools and two check valves contained in a housing. They can be used for throttling the the hydraulic fluid in the pilot and main flow of the A and B lines.
  • Sizes: 6 and 10
  • For flow control in both service lines
  • For throttling in supply and return lines
  • For vertical stacking using sandwich plate design
  • Height and width of the valves to ISO 7790 norms
  • Connection: ISO 4401
  • Max. pressure: bar 350 / PSI 5075
  • Max. flow: l/min 100 / GPM 26.4
​ ​Call us for a quote or more information. 
317-849-5115 / 800-875-5196

Poclain TVD-6 Flow Control Valve

TVD flow control valves are used to control hydraulic fluid flow independent of the inlet or outlet pressures, maintaining a constant, controlled flow irregardless of change of pressure.
  • Size: 6
  • Connection: ISO 6264
  • Max. pressure: bar 350 / PSI 5075
  • Max. flow: l/min 16 / GPM 4.2
  • Two - way pressure compensated
  • Connecting dimensions to ISO 6264
  • Operated by rotary knob / roller
  • Available with or without built-in non-return valve
​​Call us for a quote or more information. 
317-849-5115 / 800-875-5196

Poclain TVTC Flow Control Valve - 3-way Compensated

This 3-way compensated flow control valve allows you to set a consistent fluid flow independent of any pressure variations. Excess flow is routed to be used as another power port or tank return port.
  • Size: 6
  • Connection: ISO 117
  • Flow Divider9 and ISO 11926
  • Max. pressure: bar 350 / PSI 5075
  • Max. flow: l/min 50 / GPM 13.2
  • Three-way pressure compensation
  • Operated by rotary knob
  • Threaded connections to ISO 1179 and ISO 11926
  • Options:
    • Without relief valve and non-return valve
    • With relief valve
    • With non-return valve
​ Call us for a quote or more information. 
317-849-5115 / 800-875-5196

Poclain TVTP-B Flow Control Valve - 3-way Flow Regulator

TVTP-B (and TVTP-P) three-way flow regulators control priority flow to a maximum adjustable level independent of pressure and load levels. Surplus flow is diverted to the bypass port, which may be used to run another hydraulic circuit. The valve works as two-way regulator even if the pressure in the secondary circuit is higher than in the priority (regulated) circuit.
  • Size: 6 and 10
  • Max. pressure: bar 350 / PSI 5075
  • Max. flow: l/min 90 / GPM 23.8
  • Three-way pressure compensated
  • Operated by rotary knob
  • Fits into a block
​​Call us for a quote or more information. 
317-849-5115 / 800-875-5196

Poclain TVTP-P Flow Control Valve - 3-way Flow Regulator

  • Sizes: 6 and10
  • Max. pressure: 210 Bar / 3046 PSI
  • Max. flow: 90 l/min / 23.8 GPM
  • Three-way pressure compensated
  • Operated by proportional solenoid
  • Control electronics: Amplifier P/N: 1659574
  • Fits into a block
  • Plug-in connector for solenoids to ISO 4400
​ ​​Call us for a quote or more information. 
317-849-5115 / 800-875-5196

Poclain DTP Flow Control Valve - Flow Divider/Combiner

DTP flow dividers divide and combine flow of hydraulic fluid at a 50/50 ratio independent of pressure.
  • Sizes: 6 and10
  • Max. pressure: 350 Bar / 5.076 PSI
  • Max. flow: 70 l/min / 18.49 GPM
  • Dividing and combining of flows independent of pressure
  • Dividing and combining ratio: 50% / 50%
  • Direct in-line mounting
  • Threaded connections: ISO 9974, ISO 1179, ISO 11926
​ ​​Call us for a quote or more information. 
317-849-5115 / 800-875-5196

Poclain FDB20 Flow Control Valve - Bi-directional Flow Dividers

These bidirectionnal flow dividers (FDB20 and FDB25) control the speed between wheels of the same axle or between different axles by dividing or combining the flow. They are equipped with an electric or hydraulically-controlled by-pass for use in open or closed loop circuits.
  • Connections: ISO 1179 and ISO 11926
  • Max. pressure: bar 450 / PSI 6525
  • Max. flow: l/min 150 / GPM 39.6
  • Direct in-line mounting
​ ​​Call us for a quote or more information. 
317-849-5115 / 800-875-5196

Poclain FDB25 Flow Control Valve - Bi-directional Flow Dividers

  • Direct in-line mounting or direct mounting to pump
  • Threaded connections: ISO 1179 and ISO 11926
  • Max. pressure: bar 450 / PSI 6525
  • Max. flow: l/min 300 / GPM 79.3
​ ​​Call us for a quote or more information. 
317-849-5115 / 800-875-5196
Indiana's certified fluid power specialists.
7751 E 89th St
Indianapolis, IN 46256
​
Local phone: 317-849-5115
Toll-free phone: 800-875-5196
Fax: 317-849-5255
Home
Parts Vendors
Hydraulic System Design
Hydraulic Repair
About Us
Contact

    Sign up for our free newsletter
© 2023 Progressive Power & Control
Indiana's Premiere Hydraulics Distributor
Site powered by Millaviant