Webster Instruments - WebTec

Progressive Power & Control sells hydraulics test equipment from Webster Instruments.

Portable Hydraulic Testers

• DHT 1 Series
  Bi-directional digital hydraulic testers A simplified digital hydraulic tester with a single ON / OFF switch. Measure flow, temperature and pressure in one robust unit.
• FIK
  Uni-directional analogue test kit A low cost pump tester. Measure flow, pressure, temperature in one rugged unit. Flows up to 180 lpm (50 gpm)
• RFIK
  Reversible analogue test kit A low cost mechanical hydraulic tester that also allows reverse flow . Measures flow, pressure and temperature. Housed in an ergonomic rugged case.
• DHCR + LT
  Bi-directional digital hydraulic testers Separate digital tester readout for use with Webster LT flow meters. Display flow, pressure, temperature, speed.
• DHCR + LTR
  Bi-directional digital hydraulic testers Separate digital tester readout for use with Webster LTR flow meters with built-in load valve. Display flow, pressure, temperature, speed.
• DHM 3 Series
  Bi-directional digital hydraulic multimeter All-in-one portable unit, based on best-selling DHT series, measures flow, pressure, peak pressure, temperature, power and volumetric efficiency
• DHT 2 Series
  Bi-directional digital hydraulic testers The most popular sizes of digital hydraulic tester. Measure flow, pressure, temperature & speed. Flows up to 800 lpm (210 US gpm).
• HCR
  Bi-directional analogue hydraulic testers Separate analogue tester readout for use with Webster flow meters with built-in load valve. Display flow, pressure, temperature, speed.
• HT 2 Series
  Bi-directional analogue hydraulic testers The analogue hydraulic tester. Measure flow, pressure, temperature & speed. Flows up to 800 lpm (210 US gpm).

Pump Test Kits

• FIK
  Uni-directional analogue test kit A low cost pump tester. Measure flow, pressure, temperature in one rugged unit. Flows up to 180 lpm (50 gpm)
• RFIK
  Reversible analogue test kit A low cost mechanical hydraulic tester that also allows reverse flow . Measures flow, pressure and temperature. Housed in an ergonomic rugged case.

Handhelp Hydraulic Readouts

• HPM420A Kit
  Hand-held digital test system A hand-held digital readout for use with any two sensors - Flow, Pressure, Peak, Differential Pressure, Temperature, Speed
• HPM110
  Digital pressure gauge The HPM110 offers an economical solution to monitoring pressure and peak pressure with a simple visual display.

Pressure Test Kits

• PT200-2
  Pressure test kit Pressure test kit with 2 gauges, testpoints, adapters and hoses in a rugged plastic case. Fully customisable.
• PT100-4
  Pressure test kit Pressure test kits with up to 4 gauges as standard, testpoints, adapters and hoses in a rugged metal case. Fully customisable.
• PT100-6
  Pressure test kit Pressure test kits with up to 6 gauges as standard, testpoints, adapters and hoses in a rugged metal case. Fully customisable.
• PT200-8
  Pressure test kit Pressure test kit with up to 8 gauges, testpoints, adapters and hoses in a rugged plastic case. Fully customisable.

Portable Hydraulic Dataloggers

• HPM420A Kit
  Hand-held digital test system A hand-held digital readout for use with any two sensors - Flow, Pressure, Peak, Differential Pressure, Temperature, Speed
• HPM110
  Digital pressure gauge The HPM110 offers an economical solution to monitoring pressure and peak pressure with a simple visual display.
• HPM540, HPM460
  Hand-held dataloggers A powerful handheld readout & datalogger with either 4 or 6 inputs ideal for testing and diagnosing hydraulic systems.

Hydraulic Contamination Monitors

Industrial Dataloggers

• C1000
  Hydraulic data acquisition system A complete industrial hydraulic data acquisition solution. Ideal for hydraulic test stands. Measure 28 inputs simultaneously.

Panel Mount Readouts

• DF130
  Digital flow readout (for frequency input) Digital readout to display flow rate. For use with LT, LTE and LTR series flow meters. In a DIN case for panel mounting.
• DP130
  Digital pressure readout The DP130 Series Digital Readout and itʼs associated conditioned output sensors provide accurate and economical measurement.
• DS130
  Digital speed readout Digital readout to display shaft speed. For use with MT1A magnetic speed sensor. In a DIN case for panel mounting.
• DT130
  Digital temperature readout Digital readout to display temperature. For use with TP200 or LT flow blocks. In a DIN case for panel mounting.
• FC2420
  Frequency to current converter 2 channel frequency to current converter. For use with LT, LTE and LTR flow blocks. Provides linearised analogue signal out.
• DPM210
  Digital pressure meter A high accuracy digital pressure meter. Built-in pressure transducers. Measure peak and differential pressure.

Hydraulic Flow Indicators

• FI750 A#O / B#O
  Oil flow indicator (high pressure) Dial type flow indicators for use on high pressure oil hydraulic systems. Models cover range 2 - 180 lpm (0.25 - 50 US gpm).
• WPB Series
  Hydraulic Flow Monitor The WP series in-line flow monitors are designed for continuous monitoring or intermittent use for trouble shooting or commissioning industrial or mob
• FI1500 A#O
  Oil flow indicator (high pressure) Dial type flow indicators for use on high pressure oil hydraulic systems. Models cover range 10 - 400 lpm (2 - 100 US gpm).
• FI1500 B#W
  Water & Oil flow indicator (high pressur Dial type flow indicators for use on high pressure oil and water hydraulic systems. Models cover range 10 - 400 lpm (2 - 100 US gpm).
• FI750 B-W
  Water & Oil flow indicator (high pressur Dial type flow indicators for use on high pressure oil and water hydraulic systems. Models cover range 2 - 120 lpm (0.6 - 32 US gpm).
• RFI
  Reversible Flow Indicator The RFI reversible flow indicator is designed for continuous monitoring or intermittent use commissioning and servicing hydraulic systems to 420 bar.
• WPC Series
  Hydraulic Case Drain Monitor The WPC series in-line case drain monitors are designed as a low cost alternative to using a high pressure flow meter for case drain applications.
• WPG Series
  Pneumatic Flow Monitor The WP series in-line flow monitors are designed for continuous monitoring or intermittent use and ideal for checking air compressor output or testing
• WPH Series
  High Temperature Flow Monitor The WP series high temperature in-line flow monitors are designed for continuous monitoring or intermittent use on high temperature fluid systems up t
• WPM Series
  Flow Monitor with Flow Rate Alarm The WP series in-line flow rate alarms are ideal for protecting hydraulic or pneumatic systems by sounding an alarm if flow passes a preset level.
• WPP Series
  Phosphate Ester Flow Monitor The WP series in-line flow monitors are designed for continuous monitoring or intermittent use and ideal for checking power unit output or testing hyd
• WPR Series
  Flow Monitor with Flow Rate Transmitter The WP series in-line flow rate transmitters provide proportional analogue outputs of 4 - 20 mA, 0 - 5 Vdc and 1 - 5 Vdc*, 20 - 2000 Hz square-wave pu

Pressure Transducers

• MPT Series
  Pressure transducers and transmitters The MPT pressure sensors are designed for continuous monitoring of oil, gas, water, hydraulic and other pressure media in mobile equipment, industrial
• LPT
  Pressure transducer Pressure transducers for continuous monitoring in hydraulic applications. Variety of pressure ranges & output signals available.
• WPT series
  Rugged pressure transducers The WPT series are a high accuracy range of pressure transducers with a particularly rugged housing making them ideal for all hydraulic applications
• LPG
  Heavy duty pressure transducer Extra rugged pressure tranducers for continuous monitoring in hydraulic applications. US Only

Hydraulic Flow Meters

• CT Series
  Turbine flow meters 8 models of CT turbine flowmeter combine high accuracy (1%IR) with linear analogue output. Ideal for permanent installation or portable use.
• CTR series
  Turbine flowmeters with built-in loading valve 4 models that are ideal for portable testing of hydraulic pumps & components and can plug directly into a wide range of readouts (inc. HPM series)
• LT250, LT300, LT400
  Turbine type flowmeter High accuracy turbine flow meters for use with hydraulic fluids. Flows up to 400 lpm (100 US gpm). Built-in thermistor measures temperature.
• LT250R & LT400R
  Turbine type flowmeter High accuracy turbine flow meters with built-in loading valve and thermistor, for use with hydraulic fluids. Flows up to 400 lpm (100 US gpm).
• LT50 & LT125
  Turbine type flowmeter High accuracy turbine flow meters for use with hydraulic fluids. Flows up to 125 lpm (32 US gpm). Built-in thermistor measures temperature.
• LTE50 & LTE125
  Turbine type flowmeter High accuracy turbine flow meters for use with hydraulic fluids. Flows up to 125 lpm (32 US gpm). For installation in restricted spaces.
• LT5, LT10 & LT16
  Gear type flowmeter (positive displacement) High accuracy gear-type flow meters for use with hydraulic fluids. Flows up to 16 lpm (4 US gpm). Built-in thermistor measures temperature.
• CT1500
  Turbine flow meters A new addition to the range, the CT1500 is the ideal solution for permanent installation or portable use on high pressure oil hydraulic systems.
• LT750, LT750HP, LT760
  Turbine type flowmeter High accuracy turbine flow meters for use with hydraulic fluids. Flows up to 800 lpm (200 US gpm). Built-in thermistor measures temperature.
• LT750R & LT750HPR
  Turbine type flowmeter High accuracy turbine flow meters with built-in loading valve for use with hydraulic fluids. Built-in thermistor measures temperature.

Temperature and Speed Sensors

• MT1A
  Speed transducer Magnetic speed sensor (variable reluctance type) to measure shaft rotation from a gear.
• PT1 - 1000
  Temperature probe Thermistor type temperature probe. Measure 0 - 120 °C (0 - 248 °F)
• TH3
  Infra-red speed sensor (tachometer) The TH3 is ideal for measuring engine, shaft or fan speed on mobile machinery. Powered from the DHT / DHCR series of portable testers.
• TP125-5V / mA
  Temperature sensor with analogue output Rugged temperature sensor in a high pressure capsule ideal for hydraulic applications. Linear output makes it ideal for connecting into proprietary di
• TP200/TP201
  Temperature transducer Thermistor type temperature sensor for use with LT, LTE and LTR series flow blocks. Measure 0 - 120 °C (0 - 248 °F)
• TH1A
  Photo-tachometer Photo-tachometers to measure shaft rotation using reflective tape. For use with HT testers.

Test Points, Guages and Hoses

• Gauge - hose - testpoint
  Pressure gauges, hoses and testpoints 63 mm (2.5") glycerine filled pressure gauges. Micro-bore hoses up to 630 bar (9000 psi). A full range of test points.
• HV100
  Loading valve Loading valve used to simulate machine loads, includes INTERPASS(TM) safety protection. Flows up to 150 lpm (40 US gpm)
• HV400
  Loading valve Loading valve used to simulate machine loads, includes INTERPASS(TM) safety protection. Flows up to 400 lpm (100 US gpm)
• HV800
  Loading valve Loading valve used to simulate machine loads, includes INTERPASS(TM) safety protection. Flows up to 800 lpm (200 US gpm)

Hydraulic Testing Accessories

• Gauge - hose - testpoint
  Pressure gauges, hoses and testpoints 63 mm (2.5") glycerine filled pressure gauges. Micro-bore hoses up to 630 bar (9000 psi). A full range of test points.
• HV100
  Loading valve Loading valve used to simulate machine loads, includes INTERPASS(TM) safety protection. Flows up to 150 lpm (40 US gpm)
• HV400
  Loading valve Loading valve used to simulate machine loads, includes INTERPASS(TM) safety protection. Flows up to 400 lpm (100 US gpm)
• HV800
  Loading valve Loading valve used to simulate machine loads, includes INTERPASS(TM) safety protection. Flows up to 800 lpm (200 US gpm)

Calibration and Repair

• Traceable flow, pressure and temperature calibration services for the Webster range of hydraulic test equipment