Nachi SS Series Wet Type Solenoid Valve with Central Terminal BoxThe SS series wet type solenoid is a large capacity valve with high pressure and very little pressure loss. It is protected from impact and vibration and stays lubricated by being submersed in hydraulic oil. This ensures long life, minimal switching noise and smooth/quiet operation. Installation and maintenance is simplified through the use of a COM port, and coil replacement is easy due to the plug-in coil configuration. This valve serves many purposes and can be used to replace older models of valves.
Part numbers for the SS series are listed below.
|
|
Nachi SA Series Wet Type Solenoid Valve with DIN ConnectorThe SA series wet type solenoid includes an iron core that is lubricated and cushioned from impact by immersion in hydraulic oil, making it vibration resistant, quiet switching, capable of shockless operation and promising a long use cycle. The switching is efficient, quiet, and protected from surge and sparking. DIN connection makes coil replacement simple.
Part numbers for the SA series are listed below.
|
|
Nachi SE Series Pilot-Operated Lower Power Solenoid ValveThe SE series operates efficiently with very little current draw, providing energy savings and low heat operation. Using a programmable controller, this pilot-operated valve uses a small amount of electricity and there is very little coil heat generated, avoid the possibility of burning out the coil.
Part numbers for the SE series are listed below.
|
|
|
Nachi DSS and DSA 22 Design Series Solenoid Control ValveThis large capacity, high pressure control valve has an integrated pilot valve (the SS G01 wet type solenoid) which delivers durability, low pressure loss, and an extended life cycle. Internal adjustments to the pilot and drain in this modular system can be accomplished by simply placing or displacing plugs. An optional tandem center type valve, when used as an internal pilot valve, will automatically maintain pilot pressure needed for switching.
Part numbers for the DSS and DSA series are listed below.
|
|
Nachi Legato SAW/DSW Series Solenoid ValveThe SAW / DSW series solenoid valves include a monitoring switch for press safety confirming systems. This monitoring switch detects safety problems and stops the machine to avoid further unsafe operation. Once safe operation is confirmed, the machine will resume functioning. Safety Monitoring Systems are becoming increasingly popular and are being spec'd in to the design phase of hydraulic systems to avoid injury and dangerous operations. The Nachi SAW/DSW valves are ISO 12100 compliant.
Part numbers for the SAW / DSW series are listed below.
|
|
Part Numbers: SS Series Wet Type Solenoid Valve with Central Terminal Box:
|
Part Numbers: SA Series Wet Type Solenoid Valve with DIN Connector:
Part Numbers: SE Series Pilot-Operated Lower Power Solenoid Valve:
|
Part Numbers: DSS (DSA) 22 Design Series Solenoid Control Valve:
Part Numbers: SF Series Fine Solenoid Valve:
Part Numbers: DMA Type Manually Operated Directional Valve:
|
