WEBTEC Portable Hydraulic Test Equipment
Looking for something in particular? Our licensed fluid power specialists are here to help you! Call 317-849-5115 / 800-875-5196
DHT 1 / DHT2 Digital Hydraulic TestersThe DHT series of portable hydraulic testers weigh only 14lbs and provide bi-directional flow & pressure readings with a flow accuracy 1% and a bi-directional loading valve armed with INTERPASS™, Webster's trademarked burst disc protection system. A high-contrast LCD readout with US & Metric units selectable. 6,000 to 8,500 psi pressure gauge (PSI dependent on model).
Model numbers:
Call us for a quote or more information. 317-849-5115 / 800-875-5196 |
|
DHM 3 Digital Hydraulic MultimeterThis digital multimeter provides readings of flow, pressure, peak pressure, horsepower, temperature and volumetric efficiency and offers real-time, automatic calculation of horsepower & volumetric efficiency. The large LCD display has contrast controls and displays US and metric units. The built in load valve is equipped with Webster's INTERPASS™ safety disc system
Model numbers:
317-849-5115 / 800-875-5196 |
|
HT 2 Analog Hydraulic TestersThe HT2 provides an analog readout of flow, pressure, temperature and revolution per minute (RPM). As with the Webster digital testers, this analog tester utilizes a bi-directional loading valve with INTERPASS™ burst disc protection. Bi-directional flow & pressure readings with a flow accuracy of 1%.
Model numbers:
Call us for a quote or more information. 317-849-5115 / 800-875-5196 |
|
RFIK Mechanical Hydraulic TesterMechanical tester capable up to 6000 psi and a flow range of 0.5 to 54 US gpm. The tester has an easily readable dials and flow accuracy within 4%. Safe operation is enabled by Interpass, which protects system and operator against accidental over-pressure in both flow directions. No batteries required.
Model numbers:
Call us for a quote or more information. 317-849-5115 / 800-875-5196 |
|
DHCR Remote Digital Hydraulic TestersThe DHCR includes a remote digital readout and you choice of flow blocks (see below). Bi-directional flow and pressure readings with a flow accuracy within 1%. The 2 flow/temp inputs and 1 RPM input make it a versatile machine. US and metric units displayed on the readout. Battery powered by 9v with auto-off capability to save battery life. Protected by Interpass to prevent over pressure.
Model numbers:
LT Turbine flow meters with frequency output.
LTR Turbine flow meters with built-in loading valve.
317-849-5115 / 800-875-5196 |
|
DHCR1500R Hydraulic Test Kit / HV1500 Hydraulic Test KitMeasures flow, pressure, and temperature under load.
The DHCR1500R Hydraulic Test Kit contains the DHCR, LT1500, connecting hose, cable assembly, and user manuals in a rugged 24.6" x 19.4" x 13.8" carrying case. Total weight = 53 lbs.
Model numbers:
Call us for a quote or more information. 317-849-5115 / 800-875-5196 |
|
Flow Divider with Electric Motor Drive - model 2FV2VMinimum to full Priority flow in 15 seconds.
Driven by a 12 VDC (12 - 16 VDC) allows adjustment to the valve from a distant position such as in a heavy machine cab or a remote control panel. Pressure compensation allows both flows to be used at the same time at different pressures without affecting the priority (regulated) rate of flow. Blocking the bypass port while using a relief valve on the inlet line allows you to use the model 2FV2V as a unidirectional two port in line flow control.
Call us for a quote or more information. 317-849-5115 / 800-875-5196 |
|
Flow Divider with Remote Priority Control - model FDMA great choice for agricultural and industrial uses, as this remote control flow divider is vibration and contamination resistant and can be powered from a vehicle supply using the on-board 9 - 28 V D.C. supply. Current draw is automatically limited to avoid overheating or motor overload. Model FDM offers a low-cost method of controlling the speed of a hydraulic motor. The regulated (priority) flow port gives an output free of affect by load pressure while the bypass port can be directed to power a secondary hydraulic circuit. Remote control use from up to 130 feet is possible using a potentiometer.
Call us for a quote or more information. 317-849-5115 / 800-875-5196 |
|
Fixed Flow Divider - model FDC60These cast iron and steel Flow Divider-Combiners divide a primary flow into two separate flows which are pressure compensated to maintain the same ratio regardless of pressure differences between the lines. Return line flows are also held in the same ratio. Lack of aluminum in the construction makes them a good choice for mining and other high-endurance applications.
Call us for a quote or more information. 317-849-5115 / 800-875-5196 |
|
Hydraulic Data LoggersDiverter Valve - model SV80
As an alternative to using a directional control valve, a diverter valve is adequate when there is no need for a neutral position. Flows can be quickly switched between two lines, allowing fast switches from one system to another, or from a system to the reservoir, creating an idling circuit. Flow may be directed two ways: mechanically pushing the spool with spring offset or mechanical push pull operation with an adjustment knob.
Diverter Valve - model DV80 Allows the flow to be diverted mechanically by an offset spring pushing the spool. The spool and spring are contained in a sealed housing to prevent environmental corrosion. Available in one spool or two spool versions. The 2-spool version allows you to divert flow from one circuit to another or to a hydraulic fluid reservoir. A wide variety of spool ends and port threading are available.
Manual Directional Control Valve - model 180 A rotary spool type directional control valve which contains a rotor that rotates relative to body of the valve. Inlet and outlet ports can be connected in many different flow patterns to control pressurized fluid for start, stop or directional changes. Webster’s flat rotors compensate for valve wear, creating near zero-leak through the life of the valve. Available with 7 different flow patterns, 3 flow ratings and several porting options. These valves may be mounted on a manifold, on a panel or used inline on the hydraulic circuit. Manual control is achieved using ball handles, spring centering and detents.
Call us for a quote or more information. 317-849-5115 / 800-875-5196 |
|
Directional Control Valve - model BG4D seriesDurable hydraulic directional control valve used for mobile and industrial systems. Minimal leakage in the spool even under the 3625 psi pressure tank port rating. Methods of operation include lever, cam and pilot (air or oil).
317-849-5115 / 800-875-5196 |
|
Direct In-line Pressure Relief Valve - model RV020Pressure relief valves protect hydraulic circuits from overload by limiting maximum pressure to a pre-set capacity. The relief pressure setting is set by Webster to the customers specifications within pressures from 290 psi to 3000psi. The fast response of this valve protects the hydraulic circuit from shock and overload or the expansion of thermal fluids. Due to straight-through porting, the valve can be connected inline using a “T” connector. Model RV020 direct acting in-line relief valve is minimally affected by particle contamination.
Call us for a quote or more information. 317-849-5115 / 800-875-5196 |
|
WEBTEC B Series Hydraulic PumpsCast iron gear pumps with fixed clearance.
Cast iron fixed clearance gear motors.
Call us for a quote or more information. 317-849-5115 / 800-875-5196 |
|
YC Series Hydraulic PumpsPressure-balanced aluminum gear pumps.
Pressure-balanced aluminum gear motors
Call us for a quote or more information. 317-849-5115 / 800-875-5196 |
|
K Series Hydraulic PumpsPressure-balanced gear pumps with wear plate. Very durable and can be used many ways.
Flexible, rugged, dependable hydraulic gear motors
Call us for a quote or more information. 317-849-5115 / 800-875-5196 |
|
