Voith IPC Internal Gear PumpThe low noise and high volumetric efficiency of the Voith IPC gear pumps is made possible by the use of the internal gear principle, combined with plain bearings, sealing gap compensation (radial and axial), and involute gearing. These design features create a gear pump useable in variable-speed drives that is efficient, has very low flow pulsation and pressure pulsation, great suction capabilities, operates with a wide range of viscosities at a wide range of speeds, and can be driven by a motor. Combined pumps are available. Compact footprint, light weight, energy recovery and easy maintenance describe the Voith IPC gear pump.
Call us for a quote or more information. 317-849-5115 / 800-875-5196 |
|
Voith IPCA Medium-pressure Internal Gear PumpLike the Voith IPC pumps, the pumps internal gears pull pressure fluid (usually a wide range of viscosities of hydraulic oil) into the chamber between the gear and pinion. Two gears ensure proper intake. Pressure fluid is displaced when the gears rotate and the gear teeth enter the spaces between the teeth.
Radial direction - gear chambers close by meshing the gear and filler piece. Axial direction - the pressure chamber is sealed by axial plates. Call us for a quote or more information. 317-849-5115 / 800-875-5196 |
|
Voith IPCAP Medium-pressure Internal Gear Pump for Variable-speed Drives
Rotation of the IPCAPs internal gears pulls in a wide range of viscosities of pressure fluid (hydraulic oil) into the chamber between the gear and pinion. Pressure fluid is displaced when the gears rotate and the gear teeth enter the spaces between the teeth. In the radial direction, the gear chambers close by meshing the gear and filler piece. In the axial direction, the pressure chamber is sealed by axial plates.
Call us for a quote or more information.
317-849-5115 / 800-875-5196
Call us for a quote or more information.
317-849-5115 / 800-875-5196
Voith IPM Medium-pressure Internal Gear PumpThis medium-pressure involute-type gear pump is a further development of the Voith IPN series low-pressure gear pump in a medium-pressure unit. These gear pumps are targeted toward users needing a cost-effective solution in the low-to-medium pressure ranges with peak pressures up to 210 bar and continuous pressures up to 175 bar. This small footprint design generates minimal noise levels and low pressure and flow pulsation. This design functions at variable volume flows with variable speed drives and can be combined with other Voith pumps or hydraulic pumps from other manufacturers.
Models:
317-849-5115 / 800-875-5196 |
|
Voith IPA Medium-pressure Internal Gear PumpThe IPA medium-pressure pump bodies are fabricated from aluminum and designed with fewer moving parts, making it an excellent choice for mobile applications. The IPA functions up to pressures of 210 bar.
Models:
Call us for a quote or more information. 317-849-5115 / 800-875-5196 |
|
